Based on Chemical Nanotechnology, PPS’s Cloro-Rub Based Paints provide durable, high water repellent, UV, fungus / algae / bacteria resistant, thermally insulating, elastomeric capability, for water tanks, swimming pools, and various interior surfaces where water seepage needs to be prevented.
Ideal for: Swimming pools, water proofing for rooftops, water tank interiors, bathroom sunk below the tiling surface, floors, road markings, and for negative surface water proofing. The paints provide a robust defence against any capillary of high water pressure action. The paint is also highly anti-corrosive and can be applied to Plaster, RCC, Bitumen, Ceramic Tiles, Stones and Metal surfaces.
|Comparison Table||Standard Sealant||PPS Sealant|
|Water (Hydrophobic) & Dust Repellent||No||Yes|
|UV Protection Barrier||Moderate/Limited Life||High/Long Life|
|Anti-Bacterial Nano Metal||Moderate||Robust/High|
|Robust Inorganic Nano-particle Matrix||No||Yes|
|Protects Against Water Pressure||No||Yes|
|Reduced Cost / Application||No||Yes|
|Elastomeric (Stretchable Paint)||Moderate||Robust/High|
|Arrests Salt Formation||Moderate||Robust/High|
Method of Delivery:
Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign material. Use emery paper to remove loose dusts. Repair cracks and other holes with PPS water base nano wall filler for best results. Glossy, glazed or dense surfaces must be dulled.
100–120 square feet per kg, depending on the porosity of the substrate. 1 coat of Primer and 2 coats of Finish recommended.
Drying Time & Application:
Dries naturally in 12 hours for each coat. (1 primer coat and 2 Finish coats) Drying time is variable depending on temperature and humidity. Stir well before using. Use a brush for application. Solvent based. Comes in two parts - Primer & Finish. Available in various colours.